Best Speed Cube: Dayan Zhanchi vs. Moyu Weilong.

Whether or not the Dayan Zhanchi is the best speed cube is a question as old as the Dayan Zhanchi itself. The primary competitor for the Zhanchi currently is the Moyu Weilong. To find out whether the Dayan Zhanchi is the best speed cube or not, we will be putting it up against the Moyu Weilong.

Dayan Zhanchi vs. Moyu Weilong

Dayan Zhanchi

dayan zhanchi

Dayan is an authority name in the cubing world. Their years of experience truly shows in the Zhanchi, but is it enough to defeat the Moyu Weilong?

dayan zhanchi


  • Extremely fast
  • Responsive
  • Lightweight


  • Loud
  • Prone to popping and lock-ups
  • Not as fast as the Weilong

dayan zhanchi


Moyu Weilong

dayan zhanchi vs moyu weilong

The Moyu Weilong has been around for years and is known by many as the best speed cube, but how does it compare to the Dayan Zhanchi?

dayan zhanchi


  • Faster than the Zhanchi
  • Extremely smooth
  • Virtually never pops or locks
  • Solid and heavy cube


  • Can be uncontrollable for some cubers

dayan zhanchi



In terms of speed, both the Dayan Zhanchi and Moyu Weilong are extremely fast cubes. They are considered the fastest on the market. However, I have found the Moyu Weilong to be a little faster thanks to its smooth design.

Don’t be fooled into thinking that the Dayan Cube can’t be as fast as the Moyu. With the proper control, either cube could be extremely fast.


When using the Dayan Zhanchi, you get a “clicky” response that just feels good in the hands. This is similar to the feel of a mechanical keyboard opposed to the feel of a non-mechanical one.

The Moyu Weilong feels more smooth and can be an uncontrollable cube for some cubers because of it.

Overall, the response from the Dayan Zhanchi feels great, but it comes at a price.


For the Dayan Zhanchi to be “clicky” it also has to be loud. This can prove to be a problem if you have family or friends around when you are cubing. The clicking sound can get annoying and irritate them.

Both cubes make clicking sounds, don’t get me wrong, but the Moyu Weilong is just a tad more silent. It is the preferred choice for not disturbing nearby people.

Corner Cutting

In terms of corner cutting, both cubes have strengths and weaknesses. The Dayan cube has great corner cutting and can reverse corner cut much better than the Moyu.

While the Moyu can’t reverse corner cut as well as the Zhanchi, it’s corner cutting is superb.

The cube that you find best suits your needs will depend greatly on your solving method, algorithm choice, and personal preference.


Both cubes have a very similar triple torpedo design. The Moyu Weilong as wider, smoother, and bulkier torpedoes while the Dayan Zhanchi takes a lighter, pointer approach. This is why the Dayan cube is much “clickier”.

All of the Moyu Weilong pieces feel heavier and bulkier than the Dayan Zhanchi, and it feels more solid in the hands. The Zhanchi, on the other hand, feels lighter. Depending on what you personally prefer, both cubes are very viable options.

Because the Weilong pieces are so wide and bulky, the parts are held in a lot tighter without sacrificing too much speed.

Both the cubes are available in a stickerless Rubik’s cube and a stickered Rubik’s cube variant.

Popping and lock-ups

The Moyu Weilong virtually never pops or locks up. It is such a smooth cube with bulky, wide pieces allowing it to be fast and stable.

The Zhanchi is very similar, but many find it to pop or lock-up in certain scenarios. For example, executing an algorithm too fast. The Zhanchi really requires precise movements in order to get the most out of it.

Of course, the Moyu Weilong isn’t perfect either. If you try to corner cut too quickly or perform a algorithm too fast, the center caps can pop off. While this is much easier to fix than a pop, it can still get on your nerves.


Neither cube is perfect. They both have their pro’s and con’s. Because of this, most serious cubers own both cubes and often find themselves switching between the two. If I had to pick just one, however, the Moyu Weilong would beat the Dayan Zhanchi in my book.

What is the best speed cube for you? Unfortunately, you will have to decide what you desire in a cube and compare the two. In the end, the best option is to purchase both to see for yourself which you prefer. This shouldn’t be a problem at all, as both cubes are around $10. Once you buy your first speed puzzle you will become addicted anyway!

Happy Cubing!

Stickerless Rubik’s Cube. What the Heck is it?

For new speedcubers, the idea of choosing a stickerless Rubik’s cube over a stickered cube may seem like a simple aesthetic choice, but it is far more complex than that.

There are many advantages and disadvantages to think about when buying a Rubik’s cube. Sometimes stickerless cubes offer more benefits to speedcubers than stickered ones do. In this article, we will be looking at why that is.


When it comes down to keeping a cube clean, it is much easier if you have a stickerless cube. With a stickerless cube, you can simply take apart the cube, soak it, and put it back together.

This is not so easy with stickered cubes. If you try to soak your stickered cubes, you will notice the stickers start to peel off of the cube, leaving a sticky residue.

This residue is easy enough to clean off. The real difficulty lies in having to replace the stickers. These stickers have an average price of about $4.99. After buying 2 sets of replacement stickers, it becomes cheaper to buy a new cube (maybe a stickerless one).


After years of use, traditional Rubik’s cubes start to wear. One of the most common signs of wear and tear is the state of the stickers.

The only way to truly combat this aging is by constantly replacing the stickers. If you are going to spend money on replacing stickers constantly, then you should just buy a stickerless cube.

A stickerless cube will never show obvious signs of wear and tear. In fact, the stickerless design looks rather sexy. Don’t you think?

Official Competitions

This is where the stickerless Rubik’s cube used to fall short. You used to be disallowed to use a stickerless Rubik’s cube in any official event or competition.

With stickerless cubes, every single piece is entirely colored. This means that solvers using a stickerless Rubik’s cube may be at a very slight advantage.

Stickerless cubes allow you to see the color of a piece from many more angles than were traditionally possible. Because of this, stickerless Rubik’s cubes were previously deemed unfit for competition.

Since then, they have been allowed in competitive use.


What is the Best Stickerless Rubik’s Cube?

There are plenty of great stickerless cubes on the market. The two that really hit home with most cubers are the stickerless Dayan Zhanchi and Moyo Aolong.

Moyu Aolong V2 Stickerless 3×3 Speed Cube

stickerless rubik's cube

stickerless rubik's cube

Moyu has been in the speedcubing business for a long time. That being said, they sure know what they are doing.

The Moyu Aolong V2 is an improved version of the original Aolong. The new Moyu Aolong V2 offers new mechanics and design features to give the ideal cubing performance.

The new mechanics allow for faster movement and corner cutting from intense angles. All of this while hardly ever popping.

The cube tension is obviously adjustable. You can tighten or loosen the cube to your liking. With the perfect tension setup, this cube will never lock up.

Lucky you! This cube comes tensioned out of the box. Another reason this is one of the best speedcubes for beginners.

stickerless rubik's cube

Dayan ZhanChi 3x3x3 6-Color Stickerless Speed Cube

stickerless rubik's cube

stickerless rubik's cube

The Dayan Zhanchi is one of the most recommended cubes on the market. It is also my personal favorite. This cube excels in all areas.

The cube uses a torpedo design to hold itself together. This means that the cube will almost never pop. Even with loose tension.

With cut out inside corners, this cube has superb corner cutting. You can cut corners quickly without worrying about popping or even lockups.

Where other cubes would pop into a million pieces, the Dayan Zhanchi simply locks up. Sure, this can be irritating, but it is nothing compared to the difficulty of putting the cube back together.

stickerless rubik's cube


How to Take Care of Your Stickerless Rubik’s Cube

There are some important things you should know before purchasing a stickerless Rubik’s cube to ensure it is always in tip top shape.

For starters, it is important to keep your cube tensioned properly. To tension the cube, you can take off the center cap of each center piece. This can be done with a flat prying tool or with your fingernail.

Underneath each of these caps is a small screw. This screw controls the tension applied to the corresponding face of the cube.

When tensioning, it is important to only make small turns on the screw. If you over tighten or over loosen, your cube will fall apart in your hands!

After the cube is tensioned, it is a good idea to lubricate it with some type of cube lube. Never use vaseline as lube, as it will degrade the plastic of the cube over time and cause it to fall apart.

Take apart your cube and lube the core along with the inside of all the pieces.

Our Favorite Speed Cube Lube

stickerless rubik's cubestickerless rubik's cubeYou should pick up this stickerless Rubik’s cube lube to use with all of your cubes. There is enough in this bottle to last you multiple uses.

The cubes don’t really need to be lubed super often, so consider this a long term investment. After trying a lubed Rubik’s cube and comparing it with a Rubik’s cube that has not been lubed, you will be amazed at the difference it really makes.
stickerless rubik's cube

Note: While we do think it is a good idea to have a properly lubed and tensioned Rubik’s cube, tensioning a speed cube and taking it apart to lube it can be extremely difficult for new cubers.

Do not attempt to tension or lube your first Rubik’s cube. You will likely make it worse than it already is. Many cubes come pre-tensioned nowadays, so avoid tensioning your first cube at all costs.